Description
High power drillling with extreme durability in masonry, wood and metal. Featuring a new brushless motor, possible to use with dual voltage, 13mm heavy duty keyless chuck and a hybrid switch. Features: Extreme Durability New Brushless Motor New Ultra Hard Chuck Jaw Tips New Hybrid Switch Powerful to Finish Increased Efficiency and Flexibility Tough Tools for Tough Conditions IP56 Rated – Dust and Water Resistant Performance Protection Switch- addditional rubber cap seals the switch and protects it against dust and water. Electronics- electronic circuits of control panel and battery pack are covered by an Urethran layer for maximum dust and water protection. Battery- battery cells are designed to avoid intrusion of moisture Dual Voltage for Better Versatility Battery Capacity- powerful and longer lasting Optimum rotation speed control Variable speed control / reversible LED light to support work Electric brake Specifications: Max. Torque Stalling Torque High/Hard Mode 14.4V : 10Nm / 18V : 12Nm Low/Soft Mode 14.4V : 28Nm / 18V : 32Nm Instant Torque Low/Soft Mode 14.4V : 40Nm / 18V : 50N Speed at No Load High/Hard Mode: 14.4V : 70-1350rpm / 18V : 70-1580rpm Low/Soft Mode: 14.4V : 30-400rpm / 18V : 30-470rpm Blows Rate per Minute High/Hard Mode: 14.4V : 1260-24300bpm / 18V : 1260-28400bpm Low/Soft Mode: 14.4V : 540-7200bpm / 18V : 540-8500bpm Clutch Torque: 1.0-4.4Nm Max.Drill Diameter Low/Soft Mode: In Wood – 14.4V : dia.35mm / 18V : dia.38mm Low/Soft Mode: In Metal – 14.4V : dia.13mm / 18V : dia.13mm Max.Screws Driving Low/Soft Mode: In Wood screw – 14.4V : dia.6.8mm / 18V : dia.8mm Low/Soft Mode: In Self-drilling screw – 14.4V : dia.6mm / 18V : dia.6mm Battery Pack and Charging time (using EY0L82B) LJ2G: 18V / 5.0Ah (EY9L54B) Usable:65min. / Full:80min. PN2G: 18V / 3.0Ah (EY9L53B) Usable:45min. / Full:60min. LS2F: 14.4V / 4.2Ah (EY9L45B) Usable:50min. / Full:60min. Capacity LJ2G Screwing Wood Screws in Yellow pine – High Mode: dia.4.1mm x 25mm; 1750pcs Wood Screws in Yellow pine – Low Mode: dia.8mm x 80mm; 430pcs Self-Driling Screws in SPC – High Mode: dia.4mm x 13mm, t=1.6mm; 1250pcs Drilling Holes in Plaster Board + Plywood (Wooding core) – High Mode dia.50mm, t=24.5mm (Plaster Board t=12.5mm, Plywood t=12.0mm) 60pcs Holes in SPC (Hole Saw) – High Mode dia.21mm, t=1.6mm 50pcs Holes in SPC (Hole Saw) – Low Mode dia.33mm, t=1.6mm 75pcs Holes in Yellow Pine – High Mode dia.18mm x 120mm 140pcs Holes in Yellow Pine – Low Mode dia.30mm x 40mm 280pcs Holes in Mortar – High Mode dia.6.5mm x 30mm 220pcs Holes in Mortar – High Mode dia.10mm x 30mm 160pcs Holes in Masonry – High Mode dia.5mm x 40mm depth 260pcs PN2G Screwing Wood Screws in Yellow pine – High Mode: dia.4.1mm x 25mm; 1050pcs Wood Screws in Yellow pine – Low Mode: dia.8mm x 80mm; 260pcs Self-Driling Screws in SPC – High Mode: dia.4mm x 13mm, t=1.6mm; 740pcs Drilling Holes in Plaster Board + Plywood (Wooding core) – High Mode: dia.50mm, t=24.5mm (Plaster Board t=12.5mm, Plywood t=12.0mm); 35pcs Holes in SPC (Hole Saw) – High Mode: dia.21mm, t=1.6mm; 30pcs Holes in SPC (Hole Saw) – Low Mode: dia.33mm, t=1.6mm; 45pcs Holes in Yellow Pine – High Mode: dia.18mm x 120mm; 80pcs Holes in Yellow Pine – Low Mode: dia.30mm x 40mm; 170pcs Holes in Mortar – High Mode: dia.6.5mm x 30mm; 130pcs Holes in Mortar – High Mode: dia.10mm x 30mm; 100pcs Holes in Masonry – High Mode: dia.5mm x 40mm depth; 150pcs LS2F Screwing Wood Screws in Yellow pine – High Mode: dia.4.1mm x 25mm 1600pcs Wood Screws in Yellow pine – Low Mode: dia.8mm x 80mm 300pcs Self-Driling Screws in SPC – High Mode: dia.4mm x 13mm, t=1.6mm 830pcs Drilling Holes in Plaster Board + Plywood (Wooding core) – High Mode: dia.50mm, t=24.5mm (Plaster Board t=12.5mm, Plywood t=12.0mm) – Holes in SPC (Hole Saw) – High Mode: dia.21mm, t=1.6mm; 35pcs Holes in SPC (Hole Saw) – Low Mode: dia.33mm, t=1.6mm; 50pcs Holes in Yellow Pine – High Mode: dia.18mm x 120mm; 110pcs Holes in Yellow Pine – Low Mode: dia.30mm x 40mm; 180pcs Holes in Mortar – High Mode: dia.6.5mm x 30mm; 130pcs Holes in Mortar – High Mode: dia.10mm x 30mm; 110pcs Holes in Masonry – High Mode: dia.5mm x 40mm depth; 200pcs Size (LxHxW) / Weight (including battery pack) LJ2G: 188mm x 250mm x 68mm / 2.10kg PN2G: 188mm x 234mm x 68mm / 1.85kg LS2F: 188mm x 242mm x 68mm / 1.95kg
Reviews
There are no reviews yet.